फलकम्:Infobox state/doc इत्येतस्य स्रोतः दृश्यताम्

1 निम्नकारणत्वात् इदं पृष्ठं सम्पाद्यताम् सम्पादनस्य अनुमतिः नास्ति । कारणम्:
Your IP address is in a range that has been blocked on all Wikimedia Foundation wikis.
The block was made by ‪JJMC89‬. The reason given is Open proxy/Webhost: See the help page if you are affected .
Start of block: २३:४६, १९ एप्रिल् २०२४
Expiry of block: २३:४६, १९ एप्रिल् २०२७
Your current IP address is 18.117.78.215. The blocked range is 18.117.0.0/16.
Please include all above details in any queries you make. If you believe you were blocked by mistake, you can find additional information and instructions in the No open proxies global policy.
Otherwise, to discuss the block please post a request for review on Meta-Wiki. You could also send an email to the stewards VRT queue at stewards@wikimedia.org including all above details.
भवान्/भवती एतस्य पृष्ठस्य स्रोतः द्रष्टुं, मुद्रणं (print) कर्तुं च अर्हति ।
{{Documentation subpage}}
<includeonly>{{Intricate template}}
{{high-risk|402,500+}}</includeonly>
<!---PLEASE ADD METADATA (categories, interwikis) TO THE <includeonly> SECTION AT THE BOTTOM OF THIS PAGE. EDIT TEMPLATE DOCUMENTATION BELOW THIS LINE--->

This template should be used to produce an [[WP:Infobox|Infobox]] for human settlements (cities, towns, villages, communities) as well as other administrative districts, counties, provinces, etcetera - in fact, any subdivision below the level of a country, for which {{tl|Infobox country}} should be used.  Parameters are described in the table below.  For questions, see the [[Template talk:Infobox settlement|talk page]].  For USA city guideline, see [[Wikipedia:USCITY|USCITY]].

== Usage ==
*'''Important''': Please enter all numeric values in a raw, unformatted fashion.  References are to be included in their respective section footnotes field.  Numeric values that are not "raw" may create an "Expression error". Raw values will be automatically formatted by the template.  If you find a raw value is not formatted in your usage of the template, please post a notice on the discussion page for this template.
* An expression error may also occur when any coordinate parameter has a value, but one or more coordinate parameters are blank or invalid.

Basic blank template, ready to cut and paste. See the next section for a copy of the template with all parameters and comments.  See the table below that for a full description of each parameter.

=== Complete empty syntax, with comments ===
This copy of the template lists all parameters except for some of the repeating numbered parameters which are noted in the comments. Comments here should be brief; see the table below for full descriptions of each parameter.

<pre style="overflow: auto">
{{Infobox settlement
<!-- See Template:Infobox settlement for additional fields and descriptions -->
| name                    = <!-- at least one of the first two fields must be filled in -->
| official_name           =
| native_name             = <!-- if different from the English name -->
| native_name_lang        = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead -->
| other_name              =
| settlement_type         = <!-- such as Town, Village, City, Borough etc. -->
<!-- transliteration(s) -------->
| translit_lang1          = 
| translit_lang1_type     = 
| translit_lang1_info     = 
| translit_lang1_type1    = 
| translit_lang1_info1    = 
| translit_lang1_type2    = 
| translit_lang1_info2    = <!-- etc., up to translit_lang1_type6 / translit_lang1_info6 -->
| translit_lang2          = 
| translit_lang2_type     = 
| translit_lang2_info     = 
| translit_lang2_type1    = 
| translit_lang2_info1    = 
| translit_lang2_type2    = 
| translit_lang2_info2    = 
| translit_lang2_info2    = <!-- etc., up to translit_lang2_type6 / translit_lang2_info6 -->
<!-- images, nickname, motto --->
| image_skyline           = 
| imagesize               = 
| image_alt               = 
| image_caption           = 
| image                   = <!-- other image (specify File: or Image: namespace) -->
| image_flag              = 
| flag_size               = 
| flag_alt                = 
| flag_border             =
| flag_link               = 
| image_seal              = 
| seal_size               = 
| seal_alt                = 
| seal_link               = 
| image_shield            = 
| shield_size             = 
| shield_alt              = 
| shield_link             = 
| image_blank_emblem      = 
| blank_emblem_type       = <!-- defaults to Logo -->
| blank_emblem_size       = 
| blank_emblem_alt        = 
| blank_emblem_link       = 
| nickname                = 
| motto                   = 
| anthem                  = 
<!-- maps and coordinates ------>
| image_map               = 
| mapsize                 = 
| map_alt                 = 
| map_caption             = 
| image_map1              = 
| mapsize1                = 
| map_alt1                = 
| map_caption1            = 
| image_dot_map           = 
| dot_mapsize             = 
| dot_map_base_alt        = 
| dot_map_alt             = 
| dot_map_caption         = 
| dot_x = |dot_y = 
| pushpin_map             = <!-- name of a location map as per Template:Location_map -->
| pushpin_label_position  = <!-- position of the pushpin label: left, right, top, bottom, none -->
| pushpin_label           = <!-- only necessary if "name" or "official_name" are too long -->
| pushpin_map_alt         = 
| pushpin_mapsize         = 
| pushpin_map_caption     = 
| pushpin_map1            = 
| pushpin_label_position1 = 
| pushpin_label1          = <!-- only necessary if "name" or "official_name" are too long -->
| pushpin_map_alt1        = 
| pushpin_mapsize1        = 
| pushpin_map_caption1    = 
| latd  =  |latm  =  |lats  =  |latNS  = 
| longd =  |longm =  |longs =  |longEW = 
| coor_pinpoint           = <!-- to specify exact location of coordinates (was coor_type) -->
| coordinates_region      = <!-- ISO 3166-1 alpha-2 or ISO 3166-2 code for country/region containing the coordinates -->
| coordinates_type        = <!-- parameter list passed to Coord template, overrides coordinates_region -->
| coordinates_display     = inline,title
| coordinates_format      = dms
| coordinates_footnotes   = <!-- for references: use <ref> tags -->
<!-- location ------------------>
| subdivision_type        = Country
| subdivision_name        = <!-- the name of the country -->
| subdivision_type1       = 
| subdivision_name1       = 
| subdivision_type2       = 
| subdivision_name2       = <!-- etc., subdivision_type6 / subdivision_name6 -->
<!-- established --------------->
| established_title       = <!-- Settled -->
| established_date        = 
| established_title1      = <!-- Incorporated (town) -->
| established_date1       = 
| established_title2      = <!-- Incorporated (city) -->
| established_date2       = 
| established_title3      = 
| established_date3       = 
| extinct_title           = 
| extinct_date            = 
| founder                 = 
| named_for               = 
<!-- seat, smaller parts ------->
| seat_type               = <!-- defaults to: Seat -->
| seat                    = 
| seat1_type              = <!-- defaults to: Former seat -->
| seat1                   = 
| parts_type              = <!-- defaults to: Boroughs -->
| parts_style             = <!-- list, coll (collapsed list), para (paragraph format) -->
| parts                   = <!-- parts text, or header for parts list -->
| p1                      = 
| p2                      = <!-- etc., up to p50: for separate parts to be listed-->
<!-- government type, leaders -->
| government_footnotes    = <!-- for references: use <ref> tags -->
| government_type         = 
| governing_body          = 
| leader_party            = 
| leader_title            = 
| leader_name             = <!-- add &amp;nbsp; (no-break space) to disable automatic links -->
| leader_title1           = 
| leader_name1            = <!-- etc., up to leader_title4 / leader_name4 -->
<!-- display settings  --------->
| total_type              = <!-- to set a non-standard label for total area and population rows -->
<!-- area ---------------------->
| area_footnotes          = <!-- for references: use <ref> tags -->
| area_magnitude          = <!-- use only to set a special wikilink -->
| area_total_km2          = <!-- ALL fields with measurements have automatic unit conversion -->
| area_total_ha           = 
| area_land_km2           = 
| area_land_ha            = 
| area_water_km2          = 
| area_water_ha           = 
| area_water_percent      = 
| area_urban_footnotes    = <!-- for references: use <ref> tags -->
| area_urban_km2          = 
| area_urban_ha           = 
| area_rural_footnotes    = <!-- for references: use <ref> tags -->
| area_rural_km2          = 
| area_rural_ha           = 
| area_metro_footnotes    = <!-- for references: use <ref> tags -->
| area_metro_km2          = 
| area_metro_ha           = 
| area_rank               = 
| area_blank1_title       = 
| area_blank1_km2         = 
| area_blank1_ha          = 
| area_blank2_title       = 
| area_blank2_km2         = 
| area_blank2_ha          = 
| area_note               = 
<!-- dimensions ----------------->
| dimensions_footnotes    = <!-- for references: use <ref> tags -->
| length_km               = 
| width_km                = 
<!-- elevation ----------------->
| elevation_footnotes     = <!-- for references: use <ref> tags -->
| elevation_m             = 
| elevation_max_footnotes = <!-- for references: use <ref> tags -->
| elevation_max_m         = 
| elevation_min_footnotes = <!-- for references: use <ref> tags -->
| elevation_min_m         = 
<!-- population ---------------->
| population_footnotes    = <!-- for references: use <ref> tags -->
| population_total        = 
| population_as_of        = 
| population_rank         = 
| population_density_km2  = <!-- for automatic calculation of any density field, use: auto -->
| population_est          = 
| pop_est_as_of           = 
| population_urban_footnotes     = 
| population_urban               = 
| population_density_urban_km2   = 
| population_rural_footnotes     = 
| population_rural               = 
| population_density_rural_km2   = 
| population_metro_footnotes     = 
| population_metro               = 
| population_density_metro_km2   = 
| population_density             = 
| population_density_rank        = 
| population_blank1_title        = 
| population_blank1              = 
| population_density_blank1_km2  = 
| population_blank2_title        = 
| population_blank2              = 
| population_density_blank2_km2  = 
| population_demonym      = <!-- demonym, e.g. Liverpudlian for someone from Liverpool -->
| population_note         = 
<!-- demographics (section 1) -->
| demographics_type1      = 
| demographics1_footnotes = <!-- for references: use <ref> tags -->
| demographics1_title1    = 
| demographics1_info1     = <!-- etc., up to demographics1_title5 / demographics1_info5 -->
<!-- demographics (section 2) -->
| demographics_type2      = 
| demographics2_footnotes = <!-- for references: use <ref> tags -->
| demographics2_title1    = 
| demographics2_info1     = <!-- etc., up to demographics2_title5 / demographics2_info5 -->
<!-- time zone(s) -------------->
| timezone1               = 
| utc_offset1             = 
| timezone1_DST           = 
| utc_offset1_DST         = 
| timezone2               = 
| utc_offset2             = 
| timezone2_DST           = 
| utc_offset2_DST         = 
<!-- postal codes, area code --->
| postal_code_type        = <!-- enter ZIP code, Postcode, Post code, Postal code... -->
| postal_code             = 
| postal2_code_type       = <!-- enter ZIP code, Postcode, Post code, Postal code... -->
| postal2_code            = 
| area_code_type          = <!-- defaults to: Area code(s) -->
| area_code               = 
| geocode                 = 
| iso_code                = 
| registration_plate      = 
<!-- twin cities --------------->
| twin1                   = 
| twin1_country           = 
| twin2                   = 
| twin2_country           = <!-- etc., up to twin9 / twin9_country -->
<!-- blank fields (section 1) -->
| blank_name_sec1         = 
| blank_info_sec1         = 
| blank1_name_sec1        = 
| blank1_info_sec1        = 
| blank2_name_sec1        = 
| blank2_info_sec1        = <!-- etc., up to blank7_name_sec1 / blank7_info_sec1 -->
<!-- blank fields (section 2) -->
| blank_name_sec2         = 
| blank_info_sec2         = 
| blank1_name_sec2        = 
| blank1_info_sec2        = 
| blank2_name_sec2        = 
| blank2_info_sec2        = <!-- etc., up to blank7_name_sec2 / blank7_info_sec2 -->
<!-- website, footnotes -------->
| website                 = <!-- {{URL|example.com}} -->
| footnotes               = 
}}
</pre>

==Parameter names and descriptions==
{| class="wikitable" style="background: white"
! colspan=3 style="background: orange;" |

===Name and transliteration===
|- style="background: whitesmoke;"
! Parameter name !! Usage !! Description

|- valign=top
|  '''name''' || optional || This is the usual name in English.  If it's not specified, the infobox will use the '''official_name''' as a title unless this too is missing, in which case the page name will be used.
|- valign=top
|  '''official_name''' || optional || The official name in English if different from '''name'''
|- valign=top
|  '''native_name''' || optional || This will display under the name/official name
|- valign=top
|  '''native_name_lang''' || optional || Use [[List of ISO 639-2 codes|ISO 639-2 code]], e.g. "fr" for French. If there is more than one native name, in different languages, enter those names using {{tl|lang}}, instead.
|- valign=top
|  '''other_name''' || optional || For places with a former or more common name like Bombay or Saigon
|- valign=top
| '''settlement_type''' || optional || Any type can be entered, such as City, Town, Village, Hamlet, Municipality, Reservation, etc. If set, will be displayed under the names, provided that either '''name''' or '''official_name''' is filled in. Might also be used as a label for total population/area (defaulting to ''City''), if needed to distinguish from ''Urban'', ''Rural'' or ''Metro'' (if urban, rural or metro figures are not present, the label is ''Total'' unless '''total_type''' is set).

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Transliteration(s)
|- valign=top
|  '''translit_lang1''' || optional || Will place the "entry" before the word "transliteration(s)". Can be used to specify a particular language like in [[Dêlêg]] or one may just enter "Other", like in [[Gaza City|Gaza]]'s article.
|- valign=top
|  '''translit_lang1_type'''<br>'''translit_lang1_type1'''<br>to<br>'''translit_lang1_type6''' || optional ||
|- valign=top
|  '''translit_lang1_info'''<br>'''translit_lang1_info1'''<br>to<br>'''translit_lang1_info6''' || optional ||
|- valign=top
|  '''translit_lang2''' || optional || Will place a second transliteration. See [[Dêlêg]]
|- valign=top
|  '''translit_lang2_type'''<br>'''translit_lang2_type1'''<br>to<br>'''translit_lang2_type6''' || optional ||
|- valign=top
|  '''translit_lang2_info'''<br>'''translit_lang2_info1'''<br>to<br>'''translit_lang2_info6''' || optional ||

|- valign=top
! colspan=3 style="background: orange;" |

===Images, nickname, motto===
|- style="background: whitesmoke;"
! Parameter name !! Usage !! Description

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Skyline image
|- valign=top
|  '''image_skyline''' || optional || Despite the name it can be any image that an editor wishes.
|- valign=top
|  '''imagesize''' || optional || Can be used to tweak the size of the image_skyline up or down. This can be helpful if an editor want to make the infobox wider. If used, '''px''' must be specified; default size is 250px.
|- valign=top
| '''image_alt''' || optional || [[Alt text]] for the image, used by visually impaired readers who cannot see the image. See [[WP:ALT]].
|- valign=top
| '''image_caption''' || optional || Will place a caption under the image_skyline (if present)

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Flag image
|- valign=top
| '''image_flag''' || optional || Used for a flag.
|- valign=top
| '''flag_size''' || optional || Can be used to tweak the size of the image_flag up or down from 100px as desired. If used, '''px''' must be specified; default size is 100px.
|- valign=top
| '''flag_alt''' || optional || Alt text for the flag.
|- valign=top
| '''flag_border''' || optional || Set to 'no' to remove the border from the flag
|- valign=top
| '''flag_link''' || optional ||

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Seal image
|- valign=top
| '''image_seal''' || optional || If the place has an official seal.
|- valign=top
| '''seal_size''' || optional || If used, '''px''' must be specified; default size is 100px.
|- valign=top
| '''seal_alt''' || optional || Alt text for the seal.
|- valign=top
| '''seal_link''' || optional ||

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Coat of arms image
|- valign=top
| '''image_shield''' || optional || Can be used for a place with a coat of arms.
|- valign=top
| '''shield_size''' || optional || If used, '''px''' must be specified; default size is 100px.
|- valign=top
| '''shield_alt''' || optional || Alt text for the shield.
|- valign=top
| '''shield_link''' || optional || Can be used if a wiki article if known but is not automatically linked by the template. See [[Coquitlam, British Columbia]]'s infobox for an example.

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Logo or emblem image
|- valign=top
| '''image_blank_emblem''' || optional || Can be used if a place has an official logo, crest, emblem, etc. Logo is the default type. See [[Kingston upon Hull]]'s infobox for an example.
|- valign=top
| '''blank_emblem_type''' || optional || To specify what type of emblem "image_blank_emblem" is. The default is Logo.
|- valign=top
| '''blank_emblem_size''' || optional || If used, '''px''' must be specified; default size is 100px.
|- valign=top
| '''blank_emblem_alt''' || optional || Alt text for blank emblem.
|- valign=top
| '''blank_emblem_link''' || optional ||
|- valign=top
! colspan=3 style="background: #DDDDDD;" | Nickname, motto
|- valign=top
|  '''nickname''' || optional || well-known nickname(s)
|- valign=top
|  '''motto''' || optional || Will place the motto under the nicknames
|- valign=top
|  '''anthem''' || optional || Will place the anthem (song) under the nicknames
|- valign=top
! colspan=3 style="background: orange;" |

===Maps, coordinates===
|- style="background: whitesmoke;"
! Parameter name !! Usage !! Description

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Map images
|- valign=top
| '''image_map''' || optional ||
|- valign=top
| '''mapsize''' || optional || If used, '''px''' must be specified; default is 250px.
|- valign=top
| '''map_alt''' || optional || Alt text for map.
|- valign=top
| '''map_caption''' || optional ||
|- valign=top
| '''image_map1''' || optional || A secondary map image. The field '''image_map''' must be filled in first. Example see: [[Bloomsburg, Pennsylvania]].
|- valign=top
| '''mapsize1''' || optional || If used, '''px''' must be specified; default is 250px.
|- valign=top
| '''map_alt1''' || optional || Alt text for secondary map.
|- valign=top
| '''map_caption1''' || optional ||

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Dot map
|- valign=top
| '''image_dot_map''' || optional || A field for '''manually''' superimposing a dot over a blank map using an "X" & "Y" system. Blank maps, if available, can be found over at [http://commons.wikimedia.org/wiki/Main_Page Wikimedia Commons]. Example see: [[Rainbow Lake, Alberta]]
|- valign=top
| '''dot_mapsize''' || optional || To change the dot map size; default is 180px ('''px''' is optional).
|- valign=top
| '''dot_map_base_alt''' || optional ||
|- valign=top
| '''dot_map_alt''' || optional || Alt text for the dot map.
|- valign=top
| '''dot_map_caption''' || optional || For placing a caption under the dot map.
|- valign=top
| '''dot_x'''<br>'''dot_y''' || optional || For manually superimposing the dot left/right and up/down on the map.

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Pushpin map(s), coordinates
|- valign=top
| '''pushpin_map''' || optional || The name of a location map as per [[Template:Location map]] (e.g. ''Indonesia'' or ''Russia''). The coordinate fields (e.g. latd and longd) position a pushpin coordinate marker and label on the map '''automatically'''. Example see: [[Padang, Indonesia]]
|- valign=top
| '''pushpin_label_position''' || optional || The position of the label on the pushpin map relative to the pushpin coordinate marker. Valid options are {left, right, top, bottom, none}. If this field is not specified, the default value is ''right''.
|- valign=top
| '''pushpin_map_alt''' || optional || Alt text for pushpin map.
|- valign=top
| '''pushpin_mapsize''' || optional || Must be entered as only a number&mdash;'''do not use px'''. The default value is 250.
|- valign=top
| '''pushpin_map_caption''' || optional || Fill out if a different caption from ''map_caption'' is desired.
|- valign=top
| '''pushpin_relief''' || optional || Set this to <code>y</code> or any non-blank value to use an alternative relief map provided by the selected location map (if a relief map is available).
|- valign=top
| '''pushpin_map1''' || optional || Set of parameters for second pushpin map
|- valign=top
| '''pushpin_label_position1''' || optional ||
|- valign=top
| '''pushpin_map_alt1''' || optional ||
|- valign=top
| '''pushpin_mapsize1''' || optional || Must be entered as only a number&mdash;'''do not use px'''.
|- valign=top
| '''pushpin_map_caption1''' || optional ||
|- valign=top
| '''pushpin_relief1''' || optional || 
|- valign=top
| '''latd''' || optional || Latitude degrees. Can also be used for decimal degrees.
|- valign=top
| '''latm''' || optional || Latitude minutes. Omit or leave blank if '''latd''' has a decimal value.
|- valign=top
| '''lats''' || optional || Latitude seconds. Omit or leave blank if '''latd''' has a decimal value.
|- valign=top
| '''latNS''' || optional || Latitude North or South (enter '''N''' or '''S'''). Omit or leave blank if '''latd''' has a decimal value.
|- valign=top
| '''longd''' || optional || Longitude degrees. Can also be used for decimal degrees.
|- valign=top
| '''longm''' || optional || Longitude minutes. Omit or leave blank if '''longd''' has a decimal value.
|- valign=top
| '''longs''' || optional || Longitude seconds. Omit or leave blank if '''longd''' has a decimal value.
|- valign=top
| '''longEW''' || optional || Longitude East or West (enter '''E''' or '''W'''). Omit or leave blank if '''longd''' has a decimal value.

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Coordinates display
|- valign=top
| '''coor_pinpoint''' || optional || If needed, to specify more exactly where (or what) coordinates are given (e.g. ''Town Hall'') or a specific place in a larger area (e.g. a city in a county). Example: [[Masovian Voivodeship]]
|- valign=top
| {{anchor|coordregion}} '''coordinates_region''' || optional
|  Can be used to override the default [[Template:Coord/doc#region:R|region:]] for the coordinates. Use either a two character [[ISO 3166-1 alpha-2]] country code or an [[ISO 3166-2]] region code.<br>
If coordinates_region is omitted or blank, [[Template:Coord/doc#region:R|region:]] will be set according to subdivision_name, using {{tl|CountryAbbr}}. For example, subdivision_name = United Kingdom will generate coordinates with "region:GB". In addition, for Canada, India, and the United States, subdivision_name1 will be used to determine the region.  For example: subdivision_name=Canada and subdivision_name1=Ontario will yield "region:CA-ON".<br>
coordinates_type (below) overrides this parameter.
|- valign=top
| '''coordinates_type''' || optional
|  Can be used to override the default [[Template:Coord/doc#Coordinate parameters|coordinate parameters]] for the coordinates.  May include [[Template:Coord/doc#type:T|type:]], [[Template:Coord/doc#scale:N|scale:]], [[Template:Coord/doc#dim:D|dim:]], [[Template:Coord/doc#region:R|region:]], and/or [[Template:Coord/doc#source:S|source:]], joined by underscores ("_").<br>
If {{para|coordinates_type}} is omitted or blank:
* [[Template:Coord/doc#scale:N|scale:]], [[Template:Coord/doc#dim:D|dim:]], and [[Template:Coord/doc#source:S|source:]] will be left unspecified.
* [[Template:Coord/doc#region:R|region:]] will be set by {{para|coordinates_region}} (above), {{para|subdivision_name}} and {{para|subdivision_name1}} (below), and
* [[Template:Coord/doc#type:T|type:]] will be set to "type:city" if the population_total field is omitted or blank. If population_total is a number without commas, "type:city(population_total)" is used.  But if population_total includes letters or punctuation, "type:city" is used.
|- valign=top
| '''coordinates_display''' || optional
|  If the parameter is omitted, blank, or equal to <code>inline</code>, the coordinates will be displayed in the infobox only.<br>
Any value other than <code>inline</code> will have the coordinates displayed in the article's title as well.<br>
Infobox settlement uses {{Tl|Geobox coor}} to call {{Tl|Coord}} with the parameter "display=inline,title".
|- valign=top
| '''coordinates_format''' || optional
| If the parameter is omitted or blank, the coordinates format will match the format in which the coordinates are specified<br>Set to ''dms'' to force degrees/minutes/seconds or ''dec'' to force decimal.
|- valign=top
| '''coordinates_footnotes''' || optional || Reference(s) for coordinates, placed within <nowiki><ref> </ref></nowiki> tags, possibly using the citing format at {{tl|Cite web}}

|- valign=top
! colspan=3 style="background: orange;" |

===Location, established, seat, subdivisions, government, leaders===
|- style="background: whitesmoke;"
! Parameter name !! Usage !! Description

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Location
|- valign=top
| '''subdivision_type''' || optional || almost always <tt><nowiki>Country</nowiki></tt>
|- valign=top
| '''subdivision_name''' || optional || Depends on the subdivision_type - use the name in text form, sample: <tt>United States</tt> or <tt><nowiki>United States</nowiki></tt>, flag icons or flag templates can be used in this field.
|- valign=top
| '''subdivision_type1'''<br>to<br>'''subdivision_type6''' || optional || Can be State/Province, region, county.
|- valign=top
| '''subdivision_name1'''<br>to<br>'''subdivision_name6''' || optional || Use the name in text form, sample: <tt>Florida</tt> or <tt><nowiki>[[Florida]]</nowiki></tt>. Flag icons or flag templates can be used in this field per [[WP:MOSFLAG]].

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Established
|- valign=top
| '''established_title''' || optional || Example: First settled
|- valign=top
| '''established_date''' || optional ||
|- valign=top
| '''established_title1''' || optional || Example: Incorporated (town)
|- valign=top
| '''established_date1''' || optional ||
|- valign=top
| '''established_title2''' || optional || Example: Incorporated (city)
|- valign=top
| '''established_date2''' || optional ||
|- valign=top
| '''established_title3''' || optional ||
|- valign=top
| '''established_date3''' || optional ||
|- valign=top
| '''extinct_title''' || optional || For when a settlement ceases to exist
|- valign=top
| '''extinct_date''' || optional ||
|- valign=top
| '''founder''' || optional || Who the settlement was founded by
|- valign=top
| '''named_for''' || optional || The source of the name of the settlement (a person, a place, et cetera)

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Seat of government
|- valign=top
| '''seat_type''' || optional || The label for the seat of government (defaults to ''Seat'').
|- valign=top
| '''seat''' || optional || The seat of government.

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Smaller parts (e.g. boroughs of a city)
|- valign=top
| '''parts_type''' || optional || The label for the smaller subdivisions (defaults to ''Boroughs'').
|- valign=top
| '''parts_style''' || optional || Set to ''list'' to display as a collapsible list, ''coll'' as a collapsed list, or ''para'' to use paragraph style. Default is ''list'' for up to 5 items, otherwise ''coll''.
|- valign=top
| '''parts''' || optional || Text or header of the list of smaller subdivisions.
|- valign=top
| '''p1'''<br>'''p2'''<br>to<br>'''p50''' || optional || The smaller subdivisions to be listed. Example: [[Warsaw]]

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Government type, leaders
|- valign=top
| '''government_footnotes''' || optional || Reference(s) for government, placed within <nowiki><ref> </ref></nowiki> tags, possibly using the citing format at {{tl|Cite web}}
|- valign=top
| '''government_type''' || optional || Example: [[Mayor-council government]]
|- valign=top
| '''governing_body''' || optional || Name of the place's governing body
|- valign=top
| '''leader_party''' || optional || Political party of the place's leader
|- valign=top
| '''leader_title''' || optional || First title of the place's leader, e.g. Mayor
|- valign=top
| '''leader_name''' || optional || Name of the place's leader
|- valign=top
| '''leader_title1'''<br>to<br>'''leader_title4''' || optional ||
|- valign=top
| '''leader_name1'''<br>to<br>'''leader_name4''' || optional || For long lists use {{tl|Collapsible list}}. See [[Halifax Regional Municipality|Halifax]] for an example.

|- valign=top
! colspan=3 style="background: orange;" |

===Geographic information===
|- valign=top
|  colspan=3 | These fields have '''dual automatic unit conversion''' meaning that if only metric values are entered, the imperial values will be automatically converted and vice versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they should enter both values in their respective fields.
|- style="background: whitesmoke;"
! Parameter name !! Usage !! Description

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Display settings
|- valign=top
| '''total_type''' || optional || Specifies what "total" area and population figure refer to, e.g. ''Greater London''. This overrides other labels for total population/area. To make the total area and population display on the same line as the words "Area" and "Population", with no "Total" or similar label, set the value of this parameter to '''&nbsp&#59;'''.

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Area
|- valign=top
| '''area_footnotes''' || optional || Reference(s) for area, placed within <nowiki><ref> </ref></nowiki> tags, possibly using the citing format at {{tl|Cite web}}
|- valign=top
| '''area_magnitude''' || optional || Setting this to any non-empty value will create a link to the appropriate order of magnitude of area page (e.g. [[1 E+6&nbsp;m²]]).
|- valign=top
| '''area_total_km2''' || optional || Total area in square kilometres&mdash;symbol: km<sup>2</sup>. Value must be entered in '''raw format''', no commas or spaces.
|- valign=top
| '''area_total_ha''' || optional || Total area in hectares&mdash;symbol: ha. Value must be entered in '''raw format''', no commas or spaces.
|- valign=top
| '''area_land_km2''' || optional || Land area in square kilometres&mdash;symbol: km<sup>2</sup>. Value must be entered in '''raw format''', no commas or spaces.
|- valign=top
| '''area_land_ha''' || optional || similar to <code>area_total_ha</code>
|- valign=top
| '''area_water_km2''' || optional || Water area in square kilometres&mdash;symbol: km<sup>2</sup>. Value must be entered in '''raw format''', no commas or spaces.
|- valign=top
| '''area_water_ha''' || optional || similar to <code>area_total_ha</code>
|- valign=top
| '''area_water_percent''' || optional || percent of water without the "%"
|- valign=top
| '''area_urban_km2''' || optional ||
|- valign=top
| '''area_urban_ha''' || optional || similar to <code>area_total_ha</code>
|- valign=top
|- valign=top
| '''area_rural_km2''' || optional ||
|- valign=top
| '''area_rural_ha''' || optional || similar to <code>area_total_ha</code>
|- valign=top
| '''area_metro_km2''' || optional ||
|- valign=top
| '''area_metro_ha''' || optional || similar to <code>area_total_ha</code>
|- valign=top
| '''area_rank''' || optional || The settlement's area, as ranked within its parent sub-division
|- valign=top
| '''area_blank1_title''' || optional || Example see London
|- valign=top
| '''area_blank1_km2''' || optional ||
|- valign=top
| '''area_blank1_ha''' || optional || similar to <code>area_total_ha</code>
|- valign=top
| '''area_blank2_title''' || optional ||
|- valign=top
| '''area_blank2_km2''' || optional ||
|- valign=top
| '''area_blank2_ha''' || optional || similar to <code>area_total_ha</code>
|- valign=top
| '''area_note''' || optional || A place for additional information such as the name of the source.

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Dimensions
|- valign=top
| '''dimensions_footnotes''' || optional || Reference(s) for dimensions, placed within <nowiki><ref> </ref></nowiki> tags, possibly using the citing format at {{tl|Cite web}}
|- valign=top
| '''length_km''' || optional || Raw number entered in kilometres.
|- valign=top
| '''width_km''' || optional || Raw number entered in kilometres.

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Elevation
|- valign=top
| '''elevation_footnotes''' || optional || Reference(s) for elevation, placed within <nowiki><ref> </ref></nowiki> tags, possibly using the citing format at {{tl|Cite web}}
|- valign=top
| '''elevation_m''' || optional || Raw number entered in metres. However, if a range in elevation (i.e. 5&ndash;50&nbsp;m ) is desired, use the "max" and "min" fields below
|- valign=top
| '''elevation_max_footnotes'''<br>'''elevation_min_footnotes''' || optional || Same as above, but for the "max" and "min" elevations. See [[Leeds]].
|- valign=top
| '''elevation_max_m'''<br>'''elevation_min_m''' || optional || Used to give highest & lowest elevations, instead of just a single value. Example: [[Halifax Regional Municipality]].

|- valign=top
! colspan=3 style="background: orange;" |

===Population, demographics===
|- valign=top
|  colspan=3 | The density fields have '''dual automatic unit conversion''' meaning that if only metric values are entered, the imperial values will be automatically converted and vice-versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they can enter both values in their respective fields. '''To calculate density with respect to the total area automatically, type ''auto'' in place of any density value.'''
|- style="background: whitesmoke;"
! Parameter name !! Usage !! Description

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Population
|- valign=top
| '''population_total''' || optional || Actual population (see below for estimates) preferably consisting of digits only (without any commas)
|- valign=top
| '''population_footnotes''' || optional || Reference(s) for population, placed within <nowiki><ref> </ref></nowiki> tags
|- valign=top
| '''population_as_of''' || optional || The year for the population total (usually a census year)
|- valign=top
| '''population_density_km2''' || optional ||
|- valign=top
| '''population_est''' || optional || Population estimate.
|- valign=top
| '''pop_est_as_of''' || optional || The year or month & year of the population estimate
|- valign=top
| '''population_urban''' || optional ||
|- valign=top
| '''population_urban_footnotes''' || optional || Reference(s) for urban population, placed within <nowiki><ref> </ref></nowiki> tags
|- valign=top
| '''population_density_urban_km2''' || optional ||
|- valign=top
| '''population_rural''' || optional ||
|- valign=top
| '''population_rural_footnotes''' || optional || Reference(s) for rural population, placed within <nowiki><ref> </ref></nowiki> tags
|- valign=top
| '''population_density_rural_km2''' || optional ||
|- valign=top
| '''population_metro''' || optional ||
|- valign=top
| '''population_metro_footnotes''' || optional || Reference(s) for metro population, placed within <nowiki><ref> </ref></nowiki> tags
|- valign=top
| '''population_density_metro_km2''' || optional ||
|- valign=top
| '''population_rank''' || optional || The settlement's population, as ranked within its parent sub-division
|- valign=top
| '''population_density_rank''' || optional || The settlement's population density, as ranked within its parent sub-division
|- valign=top
| '''population_blank1_title''' || optional || Can be used for estimates. Example: [[Windsor, Ontario]]
|- valign=top
| '''population_blank1''' || optional || The population value for blank1_title
|- valign=top
| '''population_density_blank1_km2''' || optional ||
|- valign=top
| '''population_blank2_title''' || optional ||
|- valign=top
| '''population_blank2''' || optional ||
|- valign=top
| '''population_density_blank2_km2''' || optional ||
|- valign=top
| '''population_demonym''' || optional || A demonym or gentilic is a word that denotes the members of a people or the inhabitants of a place. For example citizens in [[Liverpool]] are known as [[Liverpudlian]]s.
|- valign=top
| '''population_note''' || optional || A place for additional information such as the name of the source. See [[Windsor, Ontario]] for example.

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Demographics (section 1)
|- valign=top
| '''demographics_type1''' || optional || Section Header. For example: Ethnicity
|- valign=top
| '''demographics1_footnotes''' || optional || Reference(s) for demographics section 1, placed within <nowiki><ref> </ref></nowiki> tags, possibly using the citing format at {{tl|Cite web}}
|- valign=top
| '''demographics1_title1'''<br>to<br>'''demographics1_title5''' || optional || Titles related to demographics_type1. For example: White, Black, Hispanic...
|- valign=top
| '''demographics1_info1'''<br>to<br>'''demographics1_info5''' || optional || Information related to the "titles". For example: 50%, 25%, 10%...

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Demographics (section 2)
|- valign=top
| '''demographics_type2''' || optional || A second section header. For example: Languages
|- valign=top
| '''demographics2_footnotes''' || optional || Reference(s) for demographics section 2, placed within <nowiki><ref> </ref></nowiki> tags, possibly using the citing format at {{tl|Cite web}}
|- valign=top
| '''demographics2_title1'''<br>to<br>'''demographics2_title5''' || optional || Titles related to '''demographics_type2'''. For example: English, French, Arabic...
|- valign=top
| '''demographics2_info1'''<br>to<br>'''demographics2_info5''' || optional || Information related to the "titles" for type2. For example: 50%, 25%, 10%...

|- valign=top
! colspan=3 style="background: orange;" |

===Other information===
|- style="background: whitesmoke;"
! Parameter name !! Usage !! Description

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Time zone(s)
|- valign=top
| '''timezone1''' || optional ||
|- valign=top
| '''utc_offset1''' || optional ||
|- valign=top
| '''timezone1_DST''' || optional ||
|- valign=top
| '''utc_offset1_DST''' || optional ||
|- valign=top
| '''timezone2''' || optional || A second timezone field for larger areas such as a Province.
|- valign=top
| '''utc_offset2''' || optional ||
|- valign=top
| '''timezone2_DST''' || optional ||
|- valign=top
| '''utc_offset2_DST''' || optional ||

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Postal code(s) & area code
|- valign=top
| '''postal_code_type''' || optional ||
|- valign=top
| '''postal_code''' || optional ||
|- valign=top
| '''postal2_code_type''' || optional ||
|- valign=top
| '''postal2_code''' || optional ||
|- valign=top
| '''area_code_type''' || optional || If left blank/not used template will default to "[[Telephone numbering plan|Area code(s)]]"
|- valign=top
| '''area_code''' || optional ||
|- valign=top
| '''geocode''' || optional || See [[Geocode]]
|- valign=top
| '''iso_code''' || optional || See [[ISO 3166]]
|- valign=top
| '''registration_plate''' || optional || See [[Vehicle registration plate]]

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Twin cities
|- valign=top
| '''twin1'''<br>to<br>'''twin9''' || optional || Name of a twin city
|- valign=top
| '''twin1_country'''<br>to<br>'''twin9_country''' || optional || Country of the twin city

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Blank fields (section 1)
|- valign=top
| '''blank_name_sec1''' || optional || Fields used to display other information. The name is displayed in bold on the left side of the infobox.
|- valign=top
| '''blank_info_sec1''' || optional || The information associated with the ''blank_name'' heading. The info is displayed on right side of infobox, in the same row as the name. For an example, see: [[Warsaw]]
|- valign=top
| '''blank1_name_sec1'''<br>to<br>'''blank7_name_sec1''' || optional || Up to 7 additional fields (8 total) can be displayed in this section
|- valign=top
| '''blank1_info_sec1'''<br>to<br>'''blank7_info_sec1''' || optional ||

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Blank fields (section 2)
|- valign=top
| '''blank_name_sec2''' || optional || For a second section of blank fields
|- valign=top
| '''blank_info_sec2''' || optional || Example: Beijing
|- valign=top
| '''blank1_name_sec2'''<br>to<br>'''blank7_name_sec2''' || optional || Up to 7 additional fields (8 total) can be displayed in this section
|- valign=top
| '''blank1_info_sec2'''<br>to<br>'''blank7_info_sec2''' || optional ||

|- valign=top
! colspan=3 style="background: #DDDDDD;" | Website, footnotes
|- valign=top
| '''website''' || optional || External link to official website, Use {{Tl|URL}}, thus: <nowiki>{{URL|example.com}}</nowiki>

|- valign=top
| '''footnotes''' || optional || Text to be displayed at the bottom of the infobox
|}
<!-- End of parameter name/description table -->

== Example 1 ==
{{Infobox settlement
| name                    = Detroit
| settlement_type         = [[City (Michigan)|City]]
| official_name           = City of Detroit
| image_skyline           = Detroit Montage.jpg
| imagesize               = 290px
| image_caption           = Images from top to bottom, left to right: [[Downtown Detroit]] skyline, [[Spirit of Detroit]], [[Greektown Historic District|Greektown]], [[Ambassador Bridge]], [[Michigan Soldiers' and Sailors' Monument]], [[Fox Theatre (Detroit)|Fox Theatre]], and [[Comerica Park]].
| image_flag              = Flag of Detroit, Michigan.svg
| image_seal              = Seal of Detroit, Michigan.svg
| nickname                = The Motor City, Motown, Renaissance City, The D, Hockeytown, The Automotive Capital of the World, Rock City, The 313
| motto                   = ''Speramus Meliora; Resurget Cineribus''<br /><small>([[Latin]]: We Hope For Better Things; It Shall Rise From the Ashes)</small>
| image_map               = Wayne County Michigan Incorporated and Unincorporated areas Detroit highlighted.svg
| mapsize                 = 250x200px
| map_caption             = Location within [[Wayne County, Michigan]] and the state of [[Michigan]]
| pushpin_map             = USA
| pushpin_map_caption     = Location within the [[Contiguous United States|contiguous United States of America]]
| latd  =  42 | latm  = 19 | lats  = 53 | latNS  = N
| longd = 083 | longm = 02 | longs = 45 | longEW = W
| coordinates_region      = US-MI
| coordinates_display     = <!-- yes (any value to also display in title area) -->
| coordinates_footnotes   =
| subdivision_type        = Country
| subdivision_name        = {{flagu|United States of America}}
| subdivision_type1       = State
| subdivision_name1       = {{flag|Michigan}}
| subdivision_type2       = [[List of counties in Michigan|County]]
| subdivision_name2       = [[Wayne County, Michigan|Wayne]]
| established_title       = Founded
| established_date        = 1701
| established_title2      = Incorporated
| established_date2       = 1806
| government_footnotes    = <!-- for references: use<ref> tags -->
| government_type         = [[Mayor-council government|Mayor-Council]]
| leader_title            = [[List of mayors of Detroit, Michigan|Mayor]]
| leader_name             = [[Dave Bing]]
| leader_party            = [[Democratic Party (United States)|D]]
| leader_title1           = [[Detroit City Council|City Council]]
| leader_name1            = {{collapsible list|bullets=yes
 | title = Members
 | 1 = [[Charles Pugh]] – Council President
 | 2 = [[Gary Brown (Detroit politician)|Gary Brown]] – Council President Pro-Tem
 | 3 = [[JoAnn Watson]]
 | 4 = [[Kenneth Cockrel, Jr.]]
 | 5 = [[Saunteel Jenkins]]
 | 6 = [[Andre Spivey]]
 | 7 = [[James Tate (Detroit politician)|James Tate]]
 | 8 = [[Brenda Jones (Detroit politician)|Brenda Jones]]
 | 9 = [[Kwame Kenyatta]]
 }}
| area_footnotes          = 
| area_magnitude          = 
| area_total_km2          = 370.03
| area_land_km2           = 359.36
| area_water_km2          = 10.67
| area_urban_km2          = 3354
| area_metro_km2          = 10135
| elevation_footnotes     = 
| elevation_m             = 183
| population_footnotes    = 
| population_as_of        = 2011
| population_total        = 706,585
| population_rank         = [[List of United States cities by population|18th in U.S.]]
| population_urban        = 3,863,924
| population_metro        = 4,285,832 (US: [[List of United States metropolitan statistical areas|13th]])
| population_blank1_title = [[Combined statistical area|CSA]]
| population_blank1       = 5,207,434 (US: [[List of United States combined statistical areas|11th]])
| population_density_km2  = {{#expr:706585/359.36 round 0}}
| population_demonym      = Detroiter
| population_note         =
| timezone                = [[Eastern Time Zone (North America)|EST]]
| utc_offset              = −5
| timezone_DST            = [[Eastern Daylight Time|EDT]]
| utc_offset_DST          = −4
| postal_code_type        =
| postal_code             =
| area_code               = [[Area code 313|313]]
| blank_name              = [[Federal Information Processing Standard|FIPS code]]
| blank_info              = {{FIPS|26|22000}}
| blank1_name             = [[Geographic Names Information System|GNIS]] feature ID
| blank1_info             = {{GNIS4|1617959}}, {{GNIS4|1626181}}
| website                 = [http://www.detroitmi.gov/ DetroitMI.gov]
| footnotes               =
}}

<pre style="overflow:auto; white-space: pre-wrap;">
{{Infobox settlement
| name                    = Detroit
| settlement_type         = [[City (Michigan)|City]]
| official_name           = City of Detroit
| image_skyline           = Detroit Montage.jpg
| imagesize               = 290px
| image_caption           = Images from top to bottom, left to right: [[Downtown Detroit]] skyline, [[Spirit of Detroit]], [[Greektown Historic District|Greektown]], [[Ambassador Bridge]], [[Michigan Soldiers' and Sailors' Monument]], [[Fox Theatre (Detroit)|Fox Theatre]], and [[Comerica Park]].
| image_flag              = Flag of Detroit, Michigan.svg
| image_seal              = Seal of Detroit, Michigan.svg
| nickname                = The Motor City, Motown, Renaissance City, The D, Hockeytown, The Automotive Capital of the World, Rock City, The 313
| motto                   = ''Speramus Meliora; Resurget Cineribus''<br /><small>([[Latin]]: We Hope For Better Things; It Shall Rise From the Ashes)</small>
| image_map               = Wayne County Michigan Incorporated and Unincorporated areas Detroit highlighted.svg
| mapsize                 = 250x200px
| map_caption             = Location within [[Wayne County, Michigan]] and the state of [[Michigan]]
| pushpin_map             = USA
| pushpin_map_caption     = Location within the [[Contiguous United States|contiguous United States of America]]
| latd  =  42 | latm  = 19 | lats  = 53 | latNS  = N
| longd = 083 | longm = 02 | longs = 45 | longEW = W
| coordinates_region      = US-MI
| coordinates_display     = <!-- yes (any value to also display in title area) -->
| coordinates_footnotes   =
| subdivision_type        = Country
| subdivision_name        = {{flagu|United States of America}}
| subdivision_type1       = State
| subdivision_name1       = {{flag|Michigan}}
| subdivision_type2       = [[List of counties in Michigan|County]]
| subdivision_name2       = [[Wayne County, Michigan|Wayne]]
| established_title       = Founded
| established_date        = 1701
| established_title2      = Incorporated
| established_date2       = 1806
| government_footnotes    = <!-- for references: use<ref> tags -->
| government_type         = [[Mayor-council government|Mayor-Council]]
| leader_title            = [[List of mayors of Detroit, Michigan|Mayor]]
| leader_name             = [[Dave Bing]]
| leader_party            = [[Democratic Party (United States)|D]]
| leader_title1           = [[Detroit City Council|City Council]]
| leader_name1            = {{collapsible list|bullets=yes
 | title = Members
 | 1 = [[Charles Pugh]] – Council President
 | 2 = [[Gary Brown (Detroit politician)|Gary Brown]] – Council President Pro-Tem
 | 3 = [[JoAnn Watson]]
 | 4 = [[Kenneth Cockrel, Jr.]]
 | 5 = [[Saunteel Jenkins]]
 | 6 = [[Andre Spivey]]
 | 7 = [[James Tate (Detroit politician)|James Tate]]
 | 8 = [[Brenda Jones (Detroit politician)|Brenda Jones]]
 | 9 = [[Kwame Kenyatta]]
 }}
| area_footnotes          = 
| area_magnitude          = 
| area_total_km2          = 370.03
| area_land_km2           = 359.36
| area_water_km2          = 10.67
| area_urban_km2          = 3354
| area_metro_km2          = 10135
| elevation_footnotes     = 
| elevation_m             = 183
| population_footnotes    = 
| population_as_of        = 2011
| population_total        = 706,585
| population_rank         = [[List of United States cities by population|18th in U.S.]]
| population_urban        = 3,863,924
| population_metro        = 4,285,832 (US: [[List of United States metropolitan statistical areas|13th]])
| population_blank1_title = [[Combined statistical area|CSA]]
| population_blank1       = 5,207,434 (US: [[List of United States combined statistical areas|11th]])
| population_density_km2  = {{#expr:706585/359.36 round 0}}
| population_demonym      = Detroiter
| population_note         =
| timezone                = [[Eastern Time Zone (North America)|EST]]
| utc_offset              = −5
| timezone_DST            = [[Eastern Daylight Time|EDT]]
| utc_offset_DST          = −4
| postal_code_type        =
| postal_code             =
| area_code               = [[Area code 313|313]]
| blank_name              = [[Federal Information Processing Standard|FIPS code]]
| blank_info              = {{FIPS|26|22000}}
| blank1_name             = [[Geographic Names Information System|GNIS]] feature ID
| blank1_info             = {{GNIS4|1617959}}, {{GNIS4|1626181}}
| website                 = [http://www.detroitmi.gov/ DetroitMI.gov]
| footnotes               =
}}
</pre>
{{clear}}

== Redirects and calls ==
At least {{PAGESINCATEGORY:Templates calling Infobox settlement}} other [[:Category:Templates calling Infobox settlement|templates call this one]] and [{{fullurl:Special:WhatLinksHere/Template:Infobox_settlement|namespace=10&hidetrans=1&hidelinks=1}} many templates redirect here].

==Supporting templates==
The following is a list of sub-templates used by Infobox settlement. See the [{{fullurl:Special:PrefixIndex|prefix=Infobox+settlement%2F&namespace=10&hideredirects=1}} current list of all sub-templates] for documentation, sandboxes, testcases, etc.
# {{tl|Infobox settlement/areadisp}}
# {{tl|Infobox settlement/densdisp}}
# {{tl|Infobox settlement/lengthdisp}}
# {{tl|Infobox settlement/link}}
# {{tl|Infobox settlement/metric}}
# {{tl|Infobox settlement/metric/mag}}
# {{tl|Infobox settlement/pref}}

==Microformat==
{{UF-hcard-geo}}

==TemplateData==
{{TemplateDataHeader}}

<templatedata>
{
    "description": "an Infobox for human settlements (cities, towns, villages, communities) as well as other administrative districts, counties, provinces, etc.",
    "params": {
        "name": {
            "label": "name",
            "description": "This is the usual name in English.  If it's not specified, the infobox will use the 'official_name' as a title unless this too is missing, in which case the page name will be used.",
            "type": "string",
            "required": false
        },
        "official_name": {
            "label": "official_name",
            "description": "The official name in English if different from 'name'",
            "type": "string",
            "required": false
        },
        "native_name": {
            "label": "native_name",
            "description": "This will display under the name/official name",
            "type": "string",
            "required": false
        },
        "native_name_lang": {
            "label": "native_name_lang",
            "description": "Use ISO 639-2 code, e.g. 'fr' for French. If there is more than one native name, in different languages, enter those names using {{lang}}, instead.",
            "type": "string",
            "required": false
        },
        "other_name": {
            "label": "other_name",
            "description": "For places with a former or more common name like Bombay or Saigon",
            "type": "string",
            "required": false
        },
        "settlement_type": {
            "label": "settlement_type",
            "description": "Any type can be entered, such as City, Town, Village, Hamlet, Municipality, Reservation, etc. If set, will be displayed under the names, provided that either 'name' or 'official_name' is filled in. Might also be used as a label for total population/area (defaulting to ''City''), if needed to distinguish from ''Urban'', ''Rural'' or ''Metro'' (if urban, rural or metro figures are not present, the label is ''Total'' unless 'total_type' is set).",
            "type": "string",
            "required": false
        },
        "translit_lang1": {
            "label": "translit_lang1",
            "description": "Will place the entry before the word 'transliteration(s)'. Can be used to specify a particular language like in Dêlêg or one may just enter 'Other', like in Gaza's article.",
            "type": "string",
            "required": false
        },
        "translit_lang1_type": {
            "label": "translit_lang1_type",
            "description": "Parameters translit_lang2_type1, ... translit_lang2_type6 are also available but not documented here",
            "type": "string",
            "required": false
        },
        "translit_lang1_info": {
            "label": "translit_lang1_info",
            "description": "Parameters translit_lang2_info1, ... translit_lang2_info6 are also available but not documented here",
            "type": "string",
            "required": false
        },
        "translit_lang2": {
            "label": "translit_lang2",
            "description": "Will place a second transliteration. See Dêlêg",
            "type": "string",
            "required": false
        },
        "image_skyline": {
            "label": "image_skyline",
            "description": "Despite the name it can be any image that an editor wishes.",
            "type": "string",
            "required": false
        },
        "imagesize": {
            "label": "imagesize",
            "description": "Can be used to tweak the size of the image_skyline up or down. This can be helpful if an editor want to make the infobox wider. If used, 'px' must be specified; default size is 250px.",
            "type": "string",
            "required": false
        },
        "image_alt": {
            "label": "image_alt",
            "description": "Alt text for the image, used by visually impaired readers who cannot see the image.",
            "type": "string",
            "required": false
        },
        "image_caption": {
            "label": "image_caption",
            "description": "Will place a caption under the image_skyline (if present)",
            "type": "string",
            "required": false
        },
        "image_flag": {
            "label": "image_flag",
            "description": "Used for a flag.",
            "type": "string",
            "required": false
        },
        "flag_size": {
            "label": "flag_size",
            "description": "Can be used to tweak the size of the image_flag up or down from 100px as desired. If used, 'px' must be specified; default size is 100px.",
            "type": "string",
            "required": false
        },
        "flag_alt": {
            "label": "flag_alt",
            "description": "Alt text for the flag.",
            "type": "string",
            "required": false
        },
        "flag_border": {
            "label": "flag_border",
            "description": "Set to no to remove the border from the flag",
            "type": "string",
            "required": false
        },
        "flag_link": {
            "label": "flag_link",
            "description": "",
            "type": "string",
            "required": false
        },
        "image_seal": {
            "label": "image_seal",
            "description": "If the place has an official seal.",
            "type": "string",
            "required": false
        },
        "seal_size": {
            "label": "seal_size",
            "description": "If used, 'px' must be specified; default size is 100px.",
            "type": "string",
            "required": false
        },
        "seal_alt": {
            "label": "seal_alt",
            "description": "Alt text for the seal.",
            "type": "string",
            "required": false
        },
        "seal_link": {
            "label": "seal_link",
            "description": "",
            "type": "string",
            "required": false
        },
        "image_shield": {
            "label": "image_shield",
            "description": "Can be used for a place with a coat of arms.",
            "type": "string",
            "required": false
        },
        "shield_size": {
            "label": "shield_size",
            "description": "If used, 'px' must be specified; default size is 100px.",
            "type": "string",
            "required": false
        },
        "shield_alt": {
            "label": "shield_alt",
            "description": "Alt text for the shield.",
            "type": "string",
            "required": false
        },
        "shield_link": {
            "label": "shield_link",
            "description": "Can be used if a wiki article if known but is not automatically linked by the template. See Coquitlam, British Columbia's infobox for an example.",
            "type": "string",
            "required": false
        },
        "image_blank_emblem": {
            "label": "image_blank_emblem",
            "description": "Can be used if a place has an official logo, crest, emblem, etc. Logo is the default type. See Kingston upon Hull's infobox for an example.",
            "type": "string",
            "required": false
        },
        "blank_emblem_type": {
            "label": "blank_emblem_type",
            "description": "To specify what type of emblem 'image_blank_emblem' is. The default is Logo.",
            "type": "string",
            "required": false
        },
        "blank_emblem_size": {
            "label": "blank_emblem_size",
            "description": "If used, 'px' must be specified; default size is 100px.",
            "type": "string",
            "required": false
        },
        "blank_emblem_alt": {
            "label": "blank_emblem_alt",
            "description": "Alt text for blank emblem.",
            "type": "string",
            "required": false
        },
        "blank_emblem_link": {
            "label": "blank_emblem_link",
            "type": "string",
            "required": false
        },
        "nickname": {
            "label": "nickname",
            "description": "well-known nickname(s)",
            "type": "string",
            "required": false
        },
        "motto": {
            "label": "motto",
            "description": "Will place the motto under the nicknames",
            "type": "string",
            "required": false
        },
        "anthem": {
            "label": "anthem",
            "description": "Will place the anthem (song) under the nicknames",
            "type": "string",
            "required": false
        },
        "image_map": {
            "label": "image_map",
            "description": "",
            "type": "string",
            "required": false
        },
        "mapsize": {
            "label": "mapsize",
            "description": "If used, 'px' must be specified; default is 250px.",
            "type": "string",
            "required": false
        },
        "map_alt": {
            "label": "map_alt",
            "description": "Alt text for map.",
            "type": "string",
            "required": false
        },
        "map_caption": {
            "label": "map_caption",
            "type": "string",
            "required": false
        },
        "image_map1": {
            "label": "image_map1",
            "description": "A secondary map image. The field 'image_map' must be filled in first. Example see: Bloomsburg, Pennsylvania.",
            "type": "string",
            "required": false
        },
        "mapsize1": {
            "label": "mapsize1",
            "description": "If used, 'px' must be specified; default is 250px.",
            "type": "string",
            "required": false
        },
        "map_alt1": {
            "label": "map_alt1",
            "description": "Alt text for secondary map.",
            "type": "string",
            "required": false
        },
        "map_caption1": {
            "label": "map_caption1",
            "description": "",
            "type": "string",
            "required": false
        },
        "image_dot_map": {
            "label": "image_dot_map",
            "description": "A field for 'manually' superimposing a dot over a blank map using an X-Y system. Blank maps, if available, can be found over at [http://commons.wikimedia.org/wiki/Main_Page Wikimedia Commons]. Example see: Rainbow Lake, Alberta",
            "type": "string",
            "required": false
        },
        "dot_mapsize": {
            "label": "dot_mapsize",
            "description": "To change the dot map size; default is 180px ('px' is optional).",
            "type": "string",
            "required": false
        },
        "dot_map_base_alt": {
            "label": "dot_map_base_alt",
            "description": "",
            "type": "string",
            "required": false
        },
        "dot_map_alt": {
            "label": "dot_map_alt",
            "description": "Alt text for the dot map.",
            "type": "string",
            "required": false
        },
        "dot_map_caption": {
            "label": "dot_map_caption",
            "description": "For placing a caption under the dot map.",
            "type": "string",
            "required": false
        },
        "dot_x": {
            "label": "dot_x",
            "description": "For manually superimposing the dot left/right on the map.",
            "type": "string",
            "required": false
        },
        "dot_y": {
            "label": "dot_y",
            "description": "For manually superimposing the dot up/down on the map.",
            "type": "string",
            "required": false
        },
        "pushpin_map": {
            "label": "pushpin_map",
            "description": "The name of a location map (e.g. 'Indonesia' or 'Russia'). The coordinate fields (e.g. 'latd' and 'longd') position a pushpin coordinate marker and label on the map 'automatically'. Example see: Padang, Indonesia",
            "type": "string",
            "required": false
        },
        "pushpin_label_position": {
            "label": "pushpin_label_position",
            "description": "The position of the label on the pushpin map relative to the pushpin coordinate marker. Valid options are {left, right, top, bottom, none}. If this field is not specified, the default value is ''right''.",
            "type": "string",
            "required": false
        },
        "pushpin_map_alt": {
            "label": "pushpin_map_alt",
            "description": "Alt text for pushpin map.",
            "type": "string",
            "required": false
        },
        "pushpin_mapsize": {
            "label": "pushpin_mapsize",
            "description": "Must be entered as only a number - do not use px. The default value is 250.",
            "type": "number",
            "required": false
        },
        "pushpin_map_caption": {
            "label": "pushpin_map_caption",
            "description": "Fill out if a different caption from ''map_caption'' is desired.",
            "type": "string",
            "required": false
        },
        "pushpin_relief": {
            "label": "pushpin_relief",
            "description": "Set this to 'y' or any non-blank value to use an alternative relief map provided by the selected location map (if a relief map is available).",
            "type": "string",
            "required": false
        },
        "pushpin_map1": {
            "label": "pushpin_map1",
            "description": "Set of parameters for second pushpin map",
            "type": "string",
            "required": false
        },
        "pushpin_label_position1": {
            "label": "pushpin_label_position1",
            "description": "",
            "type": "string",
            "required": false
        },
        "pushpin_map_alt1": {
            "label": "pushpin_map_alt1",
            "description": "",
            "type": "string",
            "required": false
        },
        "pushpin_mapsize1": {
            "label": "pushpin_mapsize1",
            "description": "Must be entered as only a number - do not use px.",
            "type": "number",
            "required": false
        },
        "pushpin_map_caption1": {
            "label": "pushpin_map_caption1",
            "description": "",
            "type": "string",
            "required": false
        },
        "pushpin_relief1": {
            "label": "pushpin_relief1",
            "description": "",
            "type": "string",
            "required": false
        },
        "latd": {
            "label": "latd",
            "description": "Latitude degrees. Can also be used for decimal degrees.",
            "type": "string",
            "required": false
        },
        "latm": {
            "label": "latm",
            "description": "Latitude minutes. Omit or leave blank if 'latd' has a decimal value.",
            "type": "string",
            "required": false
        },
        "lats": {
            "label": "lats",
            "description": "Latitude seconds. Omit or leave blank if 'latd' has a decimal value.",
            "type": "string",
            "required": false
        },
        "latNS": {
            "label": "latNS",
            "description": "Latitude North or South (enter 'N' or 'S'). Omit or leave blank if 'latd' has a decimal value.",
            "type": "string",
            "required": false
        },
        "longd": {
            "label": "longd",
            "description": "Longitude degrees. Can also be used for decimal degrees.",
            "type": "string",
            "required": false
        },
        "longm": {
            "label": "longm",
            "description": "Longitude minutes. Omit or leave blank if 'longd' has a decimal value.",
            "type": "string",
            "required": false
        },
        "longs": {
            "label": "longs",
            "description": "Longitude seconds. Omit or leave blank if 'longd' has a decimal value.",
            "type": "string",
            "required": false
        },
        "longEW": {
            "label": "longEW",
            "description": "Longitude East or West (enter 'E' or 'W'). Omit or leave blank if 'longd' has a decimal value.",
            "type": "string",
            "required": false
        },
        "coor_pinpoint": {
            "label": "coor_pinpoint",
            "description": "If needed, to specify more exactly where (or what) coordinates are given (e.g. 'Town Hall') or a specific place in a larger area (e.g. a city in a county). Example: Masovian Voivodeship",
            "type": "string",
            "required": false
        },
        "coordinates_type": {
            "label": "coordinates_type",
            "description": "Can be used to override the default coordinate parameters for the coordinates.  May include 'type:', 'scale:', 'dim:', 'region:', and/or 'source:', joined by underscores '_'.",
            "type": "string",
            "required": false
        },
        "coordinates_display": {
            "label": "coordinates_display",
            "description": "If the parameter is omitted, blank, or equal to 'inline', the coordinates will be displayed in the infobox only. Any value other than 'inline' will have the coordinates displayed in the article's title as well. Infobox settlement uses {{Geobox coor}} to call {{Coord}} with the parameter 'display=inline,title'.",
            "type": "string",
            "required": false
        },
        "coordinates_format": {
            "label": "coordinates_format",
            "description": "If the parameter is omitted or blank, the coordinates format will match the format in which the coordinates are specified. Set to 'dms' to force degrees/minutes/seconds or 'dec' to force decimal.",
            "type": "string",
            "required": false
        },
        "coordinates_footnotes": {
            "label": "coordinates_footnotes",
            "description": "Reference(s) for coordinates, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}",
            "type": "string",
            "required": false
        },
        "subdivision_type": {
            "label": "subdivision_type",
            "description": "almost always 'Country'",
            "type": "string",
            "required": false
        },
        "subdivision_name": {
            "label": "subdivision_name",
            "description": "Depends on the subdivision_type - use the name in text form, sample: 'United States' or 'United States', flag icons or flag templates can be used in this field.",
            "type": "string",
            "required": false
        },
        "subdivision_type1": {
            "label": "subdivision_type1",
            "description": "Additional subdivisions Can be State/Province, region, county.",
            "type": "string",
            "required": false
        },
        "subdivision_type2": {
            "label": "subdivision_type2",
            "description": "Additional subdivisions Can be State/Province, region, county.",
            "type": "string",
            "required": false
        },
        "subdivision_type3": {
            "label": "subdivision_type3",
            "description": "Additional subdivisions Can be State/Province, region, county.",
            "type": "string",
            "required": false
        },
        "subdivision_type4": {
            "label": "subdivision_type4",
            "description": "Additional subdivisions Can be State/Province, region, county.",
            "type": "string",
            "required": false
        },
        "subdivision_type5": {
            "label": "subdivision_type5",
            "description": "Additional subdivisions Can be State/Province, region, county.",
            "type": "string",
            "required": false
        },
        "subdivision_type6": {
            "label": "subdivision_type6",
            "description": "Additional subdivisions Can be State/Province, region, county.",
            "type": "string",
            "required": false
        },
        "subdivision_name1": {
            "label": "subdivision_name1",
            "description": "Use the name in text form, sample: 'Florida' or '[[Florida]]'. Flag icons or flag templates can be used in this field per WP:MOSFLAG.",
            "type": "string",
            "required": false
        },
        "subdivision_name2": {
            "label": "subdivision_name2",
            "description": "Use the name in text form, sample: 'Florida' or '[[Florida]]'. Flag icons or flag templates can be used in this field per WP:MOSFLAG..",
            "type": "string",
            "required": false
        },
        "subdivision_name3": {
            "label": "subdivision_name3",
            "description": "Use the name in text form, sample: 'Florida' or '[[Florida]]'. Flag icons or flag templates can be used in this field per WP:MOSFLAG..",
            "type": "string",
            "required": false
        },
        "subdivision_name4": {
            "label": "subdivision_name4",
            "description": "Use the name in text form, sample: 'Florida' or '[[Florida]]'. Flag icons or flag templates can be used in this field per WP:MOSFLAG..",
            "type": "string",
            "required": false
        },
        "subdivision_name5": {
            "label": "subdivision_name5",
            "description": "Use the name in text form, sample: 'Florida' or '[[Florida]]'. Flag icons or flag templates can be used in this field per WP:MOSFLAG..",
            "type": "string",
            "required": false
        },
        "subdivision_name6": {
            "label": "subdivision_name6",
            "description": "Use the name in text form, sample: 'Florida' or '[[Florida]]'. Flag icons or flag templates can be used in this field per WP:MOSFLAG..",
            "type": "string",
            "required": false
        },
        "established_title": {
            "label": "established_title",
            "description": "Example: First settled",
            "type": "string",
            "required": false
        },
        "established_date": {
            "label": "established_date",
            "type": "string",
            "required": false
        },
        "established_title1": {
            "label": "established_title1",
            "description": "Example: Incorporated (town)",
            "type": "string",
            "required": false
        },
        "established_date1": {
            "label": "established_date1",
            "type": "string",
            "required": false
        },
        "established_title2": {
            "label": "established_title2",
            "description": "Example: Incorporated (city)",
            "type": "string",
            "required": false
        },
        "established_date2": {
            "label": "established_date2",
            "type": "string",
            "required": false
        },
        "established_title3": {
            "label": "established_title3",
            "type": "string",
            "required": false
        },
        "established_date3": {
            "label": "established_date3",
            "type": "string",
            "required": false
        },
        "extinct_title": {
            "label": "extinct_title",
            "description": "For when a settlement ceases to exist",
            "type": "string",
            "required": false
        },
        "extinct_date": {
            "label": "extinct_date",
            "type": "string",
            "required": false
        },
        "founder": {
            "label": "founder",
            "description": "Who the settlement was founded by",
            "type": "string",
            "required": false
        },
        "named_for": {
            "label": "named_for",
            "description": "The source of the name of the settlement (a person, a place, et cetera)",
            "type": "string",
            "required": false
        },
        "seat_type": {
            "label": "seat_type",
            "description": "The label for the seat of government (defaults to 'Seat').",
            "type": "string",
            "required": false
        },
        "seat": {
            "label": "seat",
            "description": "The seat of government.",
            "type": "string",
            "required": false
        },
        "parts_type": {
            "label": "parts_type",
            "description": "The label for the smaller subdivisions (defaults to 'Boroughs').",
            "type": "string",
            "required": false
        },
        "parts_style": {
            "label": "parts_style",
            "description": "Set to 'list' to display as a collapsible list, 'coll' as a collapsed list, or 'para' to use paragraph style. Default is 'list' for up to 5 items, otherwise 'coll'.",
            "type": "string",
            "required": false
        },
        "parts": {
            "label": "parts",
            "description": "Text or header of the list of smaller subdivisions.",
            "type": "string",
            "required": false
        },
        "p1": {
            "label": "p1",
            "description": "The smaller subdivisions to be listed. Parameters 'p1' to 'p50' can also be used.",
            "type": "string",
            "required": false
        },
        "government_footnotes": {
            "label": "government_footnotes",
            "description": "References for government, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}",
            "type": "string",
            "required": false
        },
        "government_type": {
            "label": "government_type",
            "description": "Example: '[[Mayor-council government]]'",
            "type": "string",
            "required": false
        },
        "governing_body": {
            "label": "governing_body",
            "description": "Name of the place's governing body",
            "type": "string",
            "required": false
        },
        "leader_party": {
            "label": "leader_party",
            "description": "Political party of the place's leader",
            "type": "string",
            "required": false
        },
        "leader_title": {
            "label": "leader_title",
            "description": "First title of the place's leader, e.g. Mayor",
            "type": "string",
            "required": false
        },
        "leader_name": {
            "label": "leader_name",
            "description": "Name of the place's leader",
            "type": "string",
            "required": false
        },
        "leader_title1": {
            "label": "leader_title1",
            "description": "First title of the place's leader, e.g. Mayor",
            "type": "string",
            "required": false
        },
        "leader_name1": {
            "label": "leader_name1",
            "description": "Additional names for leaders. Parameters 'leader_name1' .. 'leader_name4' are available. For long lists use {{Collapsible list}}.",
            "type": "string",
            "required": false
        },
        "total_type": {
            "label": "total_type",
            "description": "Specifies what total area and population figure refer to, e.g. 'Greater London'. This overrides other labels for total population/area. To make the total area and population display on the same line as the words Area and Population, with no Total or similar label, set the value of this parameter to '&nbsp&#59;'.",
            "type": "string",
            "required": false
        },
        "area_footnotes": {
            "label": "area_footnotes",
            "description": "Reference(s) for area, placed within <ref> </ref> tags, possibly using the citing format at {Cite web}",
            "type": "string",
            "required": false
        },
        "area_magnitude": {
            "label": "area_magnitude",
            "description": "Setting this to any non-empty value will create a link to the appropriate order of magnitude of area page (e.g. [[1 E+6&nbsp;m²]]).",
            "type": "string",
            "required": false
        },
        "area_total_km2": {
            "label": "area_total_km2",
            "description": "Total area in square kilometres - symbol: km². Value must be entered in raw format, no commas or spaces.",
            "type": "string",
            "required": false
        },
        "area_total_ha": {
            "label": "area_total_ha",
            "description": "Total area in hectares - symbol: ha. Value must be entered in 'raw format', no commas or spaces.",
            "type": "string",
            "required": false
        },
        "area_land_km2": {
            "label": "area_land_km2",
            "description": "Land area in square kilometres - symbol: km^2. Value must be entered in 'raw format', no commas or spaces.",
            "type": "number",
            "required": false
        },
        "area_land_ha": {
            "label": "area_land_ha",
            "description": "similar to 'area_total_ha'",
            "type": "number",
            "required": false
        },
        "area_water_km2": {
            "label": "area_water_km2",
            "description": "Water area in square kilometres symbol: km^2. Value must be entered in 'raw format', no commas or spaces.",
            "type": "number",
            "required": false
        },
        "area_water_ha": {
            "label": "area_water_ha",
            "description": "similar to 'area_total_ha'",
            "type": "number",
            "required": false
        },
        "area_water_percent": {
            "label": "area_water_percent",
            "description": "percent of water without the %.",
            "type": "number",
            "required": false
        },
        "area_urban_km2": {
            "label": "area_urban_km2",
            "type": "number",
            "required": false
        },
        "area_urban_ha": {
            "label": "area_urban_ha",
            "description": "similar to 'area_total_ha'",
            "type": "number",
            "required": false
        },
        "area_rural_km2": {
            "label": "area_rural_km2",
            "type": "number",
            "required": false
        },
        "area_rural_ha": {
            "label": "area_rural_ha",
            "description": "similar to 'area_total_ha'",
            "type": "number",
            "required": false
        },
        "area_metro_km2": {
            "label": "area_metro_km2",
            "type": "number",
            "required": false
        },
        "area_metro_ha": {
            "label": "area_metro_ha",
            "description": "similar to 'area_total_ha'",
            "type": "number",
            "required": false
        },
        "area_rank": {
            "label": "area_rank",
            "description": "The settlement's area, as ranked within its parent sub-division",
            "type": "string",
            "required": false
        },
        "area_blank1_title": {
            "label": "area_blank1_title",
            "description": "Example see London",
            "type": "string",
            "required": false
        },
        "area_blank1_km2": {
            "label": "area_blank1_km2",
            "type": "number",
            "required": false
        },
        "area_blank1_ha": {
            "label": "area_blank1_ha",
            "description": "similar to 'area_total_ha'",
            "type": "number",
            "required": false
        },
        "area_blank2_title": {
            "label": "area_blank2_title",
            "type": "string",
            "required": false
        },
        "area_blank2_km2": {
            "label": "area_blank2_km2",
            "type": "number",
            "required": false
        },
        "area_blank2_ha": {
            "label": "area_blank2_ha",
            "description": "Similar to 'area_total_ha'",
            "type": "number",
            "required": false
        },
        "area_note": {
            "label": "area_note",
            "description": "A place for additional information such as the name of the source.",
            "type": "string",
            "required": false
        },
        "dimensions_footnotes": {
            "label": "dimensions_footnotes",
            "description": "Reference(s) for dimensions, placed within <nowiki><ref> </ref></nowiki> tags, possibly using the citing format at {{tl|Cite web}}",
            "type": "string",
            "required": false
        },
        "length_km": {
            "label": "length_km",
            "description": "Raw number entered in kilometres.",
            "type": "string",
            "required": false
        },
        "width_km": {
            "label": "width_km",
            "description": "Raw number entered in kilometres.",
            "type": "number",
            "required": false
        },
        "elevation_footnotes": {
            "label": "elevation_footnotes",
            "description": "Reference(s) for elevation, placed within <nowiki><ref> </ref></nowiki> tags, possibly using the citing format at {{tl|Cite web}}",
            "type": "string",
            "required": false
        },
        "elevation_m": {
            "label": "elevation_m",
            "description": "Raw number entered in metres. However, if a range in elevation (i.e. 5&ndash;50&nbsp;m ) is desired, use the 'max' and 'min' fields below",
            "type": "number",
            "required": false
        },
        "elevation_min_m": {
            "label": "elevation_min_m",
            "type": "number",
            "required": false
        },
        "elevation_max_footnotes": {
            "label": "elevation_max_footnotes",
            "type": "string",
            "required": false
        },
        "elevation_min_footnotes": {
            "label": "elevation_min_footnotes",
            "type": "string",
            "required": false
        },
        "population_total": {
            "label": "population_total",
            "description": "Actual population (see below for estimates) preferably consisting of digits only (without any commas)",
            "type": "string",
            "required": false
        },
        "population_footnotes": {
            "label": "population_footnotes",
            "description": "Reference(s) for population, placed within <nowiki><ref> </ref></nowiki> tags",
            "type": "string",
            "required": false
        },
        "population_as_of": {
            "label": "population_as_of",
            "description": "The year for the population total (usually a census year)",
            "type": "string",
            "required": false
        },
        "population_density_km2": {
            "label": "population_density_km2",
            "type": "number",
            "required": false
        },
        "population_est": {
            "label": "population_est",
            "description": "Population estimate.",
            "type": "number",
            "required": false
        },
        "pop_est_as_of": {
            "label": "pop_est_as_of",
            "description": "The year or month & year of the population estimate",
            "type": "string",
            "required": false
        },
        "population_urban": {
            "label": "population_urban",
            "type": "string",
            "required": false
        },
        "population_urban_footnotes": {
            "label": "population_urban_footnotes",
            "description": "Reference(s) for urban population, placed within <nowiki><ref> </ref></nowiki> tags",
            "type": "string",
            "required": false
        },
        "population_density_urban_km2": {
            "label": "population_density_urban_km2",
            "type": "number",
            "required": false
        },
        "population_rural": {
            "label": "population_rural",
            "type": "string",
            "required": false
        },
        "population_rural_footnotes": {
            "label": "population_rural_footnotes",
            "description": "Reference(s) for rural population, placed within <nowiki><ref> </ref></nowiki> tags",
            "type": "string",
            "required": false
        },
        "population_density_rural_km2": {
            "label": "population_density_rural_km2",
            "type": "number",
            "required": false
        },
        "population_metro": {
            "label": "population_metro",
            "type": "string",
            "required": false
        },
        "population_metro_footnotes": {
            "label": "population_metro_footnotes",
            "description": "Reference(s) for metro population, placed within <nowiki><ref> </ref></nowiki> tags",
            "type": "string",
            "required": false
        },
        "population_density_metro_km2": {
            "label": "population_density_metro_km2",
            "type": "number",
            "required": false
        },
        "population_rank": {
            "label": "population_rank",
            "description": "The settlement's population, as ranked within its parent sub-division",
            "type": "string",
            "required": false
        },
        "population_density_rank": {
            "label": "population_density_rank",
            "description": "The settlement's population density, as ranked within its parent sub-division",
            "type": "string",
            "required": false
        },
        "population_blank1_title": {
            "label": "population_blank1_title",
            "description": "Can be used for estimates. Example: Windsor, Ontario",
            "type": "string",
            "required": false
        },
        "population_blank1": {
            "label": "population_blank1",
            "description": "The population value for blank1_title",
            "type": "string",
            "required": false
        },
        "population_density_blank1_km2": {
            "label": "population_density_blank1_km2",
            "type": "string",
            "required": false
        },
        "population_blank2_title": {
            "label": "population_blank2_title",
            "type": "string",
            "required": false
        },
        "population_blank2": {
            "label": "population_blank2",
            "type": "string",
            "required": false
        },
        "population_density_blank2_km2": {
            "label": "population_density_blank2_km2",
            "type": "string",
            "required": false
        },
        "population_demonym": {
            "label": "population_demonym",
            "description": "A demonym or gentilic is a word that denotes the members of a people or the inhabitants of a place. For example citizens in Liverpool are known as Liverpudlians.",
            "type": "string",
            "required": false
        },
        "population_note": {
            "label": "population_note",
            "description": "A place for additional information such as the name of the source. See Windsor, Ontario for example.",
            "type": "string",
            "required": false
        },
        "demographics_type1": {
            "label": "demographics_type1",
            "description": "Section Header. For example: Ethnicity",
            "type": "string",
            "required": false
        },
        "demographics1_footnotes": {
            "label": "demographics1_footnotes",
            "description": "Reference(s) for demographics section 1, placed within <nowiki><ref> </ref></nowiki> tags, possibly using the citing format at {{tl|Cite web}}",
            "type": "string",
            "required": false
        },
        "demographics1_title1": {
            "label": "demographics1_title1",
            "description": "Titles related to demographics_type1. For example: White, Black, Hispanic... Additional rows 'demographics1_title1' to 'demographics1_title5' are also avaliable",
            "type": "string",
            "required": false
        },
        "demographics1_info5": {
            "label": "demographics1_info5",
            "description": "Information related to the titles. For example: 50%, 25%, 10%...  Additional rows 'demographics1_info1' to 'demographics1_info5' are also avaliable",
            "type": "string",
            "required": false
        },
        "demographics_type2": {
            "label": "demographics_type2",
            "description": "A second section header. For example: Languages",
            "type": "string",
            "required": false
        },
        "demographics2_footnotes": {
            "label": "demographics2_footnotes",
            "description": "Reference(s) for demographics section 2, placed within <nowiki><ref> </ref></nowiki> tags, possibly using the citing format at {{tl|Cite web}}",
            "type": "string",
            "required": false
        },
        "demographics2_title1": {
            "label": "demographics2_title1",
            "description": "Titles related to demographics_type1. For example: English, French, Arabic... Additional rows 'demographics2_title2' to 'demographics1_title5' are also avaliable",
            "type": "string",
            "required": false
        },
        "demographics2_info1": {
            "label": "demographics2_info1",
            "description": "Information related to the titles. For example: 50%, 25%, 10%...  Additional rows 'demographics2_info2' to 'demographics2_info5' are also avaliable",
            "type": "string",
            "required": false
        },
        "timezone1": {
            "label": "timezone1",
            "type": "string",
            "required": false
        },
        "utc_offset1": {
            "label": "utc_offset1",
            "type": "string",
            "required": false
        },
        "timezone1_DST": {
            "label": "timezone1_DST",
            "type": "string",
            "required": false
        },
        "utc_offset1_DST": {
            "label": "utc_offset1_DST",
            "type": "string",
            "required": false
        },
        "timezone2": {
            "label": "timezone2",
            "description": "A second timezone field for larger areas such as a Province.",
            "type": "string",
            "required": false
        },
        "utc_offset2": {
            "label": "utc_offset2",
            "type": "string",
            "required": false
        },
        "timezone2_DST": {
            "label": "timezone2_DST",
            "type": "string",
            "required": false
        },
        "utc_offset2_DST": {
            "label": "utc_offset2_DST",
            "type": "string",
            "required": false
        },
        "postal_code_type": {
            "label": "postal_code_type",
            "description": "Label used for postal code info, e.g. 'Zip code'. Defaults to 'Postal code'.",
            "type": "string",
            "required": false
        },
        "postal_code": {
            "label": "postal_code",
            "description": "Postal code/zip code",
            "type": "string",
            "required": false
        },
        "postal2_code_type": {
            "label": "postal2_code_type",
            "type": "string",
            "required": false
        },
        "postal2_code": {
            "label": "postal2_code",
            "type": "string",
            "required": false
        },
        "area_code": {
            "label": "area_code",
            "description": "Telephone area code.",
            "type": "string",
            "required": false
        },
        "area_code_type": {
            "label": "area_code_type",
            "description": "If left blank/not used template will default to 'Area code(s)'",
            "type": "string",
            "required": false
        },
        "geocode": {
            "label": "geocode",
            "description": "See Geocode",
            "type": "string",
            "required": false
        },
        "iso_code": {
            "label": "iso_code",
            "description": "See ISO 3166",
            "type": "string",
            "required": false
        },
        "registration_plate": {
            "label": "registration_plate",
            "description": "See Vehicle registration plate",
            "type": "string",
            "required": false
        },
        "twin1": {
            "label": "twin1",
            "description": "Name of a twin city. Up to 9 cities 'twin1' ... 'twin9' can be specified.",
            "type": "string",
            "required": false
        },
        "twin1_country": {
            "label": "twin1_country",
            "description": "Country of a twin city. Up to 9 countries 'twin1_country' ... 'twin9_country' can be specified.",
            "type": "string",
            "required": false
        },
        "blank_name_sec1": {
            "label": "blank_name_sec1",
            "description": "Fields used to display other information. The name is displayed in bold on the left side of the infobox.",
            "type": "string",
            "required": false
        },
        "blank_info_sec1": {
            "label": "blank_info_sec1",
            "description": "The information associated with the ''blank_name'' heading. The info is displayed on right side of infobox, in the same row as the name. For an example, see: [[Warsaw]]",
            "type": "string",
            "required": false
        },
        "blank1_name_sec1": {
            "label": "blank1_name_sec1",
            "description": "Up to 7 additional fields 'blank1_name_sec1' ... 'blank7_name_sec1' can be specified",
            "type": "string",
            "required": false
        },
        "blank1_info_sec1": {
            "label": "blank1_info_sec1",
            "description": "Up to 7 additional fields 'blank1_info_sec1' ... 'blank7_info_sec1' can be specified",
            "type": "string",
            "required": false
        },
        "blank_name_sec2": {
            "label": "blank_name_sec2",
            "description": "For a second section of blank fields",
            "type": "string",
            "required": false
        },
        "blank_info_sec2": {
            "label": "blank_info_sec2",
            "description": "Example: Beijing",
            "type": "string",
            "required": false
        },
        "blank1_name_sec2": {
            "label": "blank1_name_sec2",
            "description": "Up to 7 additional fields 'blank1_name_sec2' ... 'blank7_name_sec2' can be specified",
            "type": "string",
            "required": false
        },
        "blank1_info_sec2": {
            "label": "blank1_info_sec2",
            "description": "Up to 7 additional fields 'blank1_info_sec2' ... 'blank7_info_sec2' can be specified",
            "type": "string",
            "required": false
        },
        "website": {
            "label": "website",
            "description": "External link to official website, Use the {{URL}} template, thus: {{URL|example.com}}",
            "type": "string",
            "required": false
        },
        "footnotes": {
            "label": "footnotes",
            "description": "Text to be displayed at the bottom of the infobox.",
            "type": "string",
            "required": false
        }
    }
}</templatedata>



<includeonly>

<!-- Add categories below-->
[[Category:City infobox templates|Settlement]]
[[Category:Geography infobox templates|Settlement]]

<!-- Add interwikis to http://www.wikidata.org/wiki/Q5683132 -->
</includeonly>
अस्मिन् पृष्ठे प्रयुक्तफलकानि:
फलकम्:Infobox state/doc प्रति निवर्त्यताम्।
"https://sa.wikipedia.org/wiki/फलकम्:Infobox_state/doc" इत्यस्माद् प्रतिप्राप्तम्